Storage tanks, are designed for hot water production using thermal solar energy. Polyurethane foam insulation. With two coils. To avoid possible corrosion problems, a magnesium anode is fitted, connected to an anode tester for checking the degree of wear.
The AS 90-1E, AS 120-1E, AS 160-1E, AS 200-2E, AS 300-2E, AS 400-2E and AS 500-2E storage tanks, are designed for hot water production using thermal solar energy. Polyurethane foam insulation. With two coils. To avoid possible corrosion problems, a magnesium anode is fitted, connected to an anode tester for checking the degree of wear. Optionally a 2.5 kW electrical resistance may be supplied.
The range of hot water tanks is ideal for the production of hot water for combined applications (domestic hot water + central heating).
This solution optimizes the available space and installation cost, leading to maximum energy savings. The range, made of enamelled steel, has two models with 800 and 1000 litres of total capacity. An ideal option for harnessing solar energy to reduce your energy bill.
Instant status information regarding the system components.
• Control and regulation of the temperature of the solar collector and the solar DHW preheating tank.
• Control and regulation of the individual preheating tank in residential buildings.
• Regulation of 10 types of installation.
• Overheating protection function.
Instant status information regarding the system components.
• Control and regulation of the temperature of the solar collector and the solar DHW preheating and backup tanks.
• Control and regulation of the backup auxiliary generator.
• Anti-legionella function.
• Regulation of up to 13 different types of installation.
• Overheating protection function.
Twin branch hydraulic set including: High efficiency circulator, flow and return thermometers, relief valve, pressure gauge, flow meter and filling and drain valves.
Single branch hydraulic set including: High efficiency circulator, thermometer, relief valve, pressure gauge and flow meter.
OUR PRODUCT OFFERING IS COMPLETED WITH A SERIES OF ACCESSORIES
SPECIFICALLY DESIGNED FOR SOLAR ENERGY INSTALLATIONS:
1. Our range comprises 18, 25, 35, 50 y 80 litre models.
2. The presence of air in the system is a major cause of reduced performance. We recommend to install this component in order to eliminate air which may get in during the filling.
3. We recommend it be installed in each row or battery of solar collectors.
4. Essential for all installations which do not have a Solar Hydraulic set.
5. Specially designed for solar energy installations using removable corrugated plates made of AISI 316 stainless steel.
6. It must be installed in systems with individual storage tanks in each dwelling to regulate efficient energy use.
7. In periods of absence or low DHW consumption, these systems can store hot water at temperatures above 60 °C. So it is essential to incorporate a thermostatic mixing valve to protects the user of the system.
8. This is the fluid which transfers the heat produced in the system. It is essential also to protect the installation from frosts and help maintain the performance and extend the life of system components.
9. To facilitate the installation of solar equipment pipes are supplied properly insulated according to regulations, complete with sensor cable. Four fixing clamps are also included.