The range of Solar Easy DHW systems represents a revolutionary new “Plug & Play” concept, ready to get the most benefit from solar thermal energy.
The smallest possible space houses the hydraulic set, the expansion tank and the control unit. Fully connected and wired to form a single whole.
The range comprises 14 different systems combining 160, 200, 300, 400 and 500 litre storage tanks, with the SOL 200, SOL 250, Mediterráneo SLIM 200 and Mediterráneo SLIM 250 collectors.
Benefits of the system:
•Easy to install: You only need to connect the pipe fromthe storage tank to the solar collectors.
•Minimum space required: The storage tank integrates all components needed for installation, thus taking up the minimum possible space.
•With overheating protection: There is no need to install any system for eliminating surplus heat, since it has a nighttime recirculation system for the elimination of surplus heat, as well as a built-in oversized expansion vessel.
•With antifreeze system: The control unit has a built-in pre-programmed anti-freeze system.
Comprising a combination of 1 or 2 Mediterráneo SLIM 200 flat collectors or 1 Mediterráneo SLIM 250 flat collector, a 150, 200 or 300 litre storage tank and all necessary hydraulic, regulation and safety fittings needed to install your solar energy domestic hot water system.
• Solar Hydraulic 10
• FlexVent automatic 1/2” air vent
• Flamcovent 22 air separator
• CS-2 solar control unit
• Vascoflex solar 18 l
The SOLAR EASY DHW and central heating systems comprise everything you need to build a solar DHW system with central heating backup.
The SOLAR EASY DHW central heating and pool systems comprise all the elements needed to install a solar DHW system with backup for both central heating and the pool. Incorporates the plate heat exchanger and regulation needed for pool heating.
The site includes a storage tank-in-a-tank, that is, a storage tank in which the bottom part is used as a thermal inertia tank and the upper tank is used for the production of DHW.
. The control unit controls all elements of the installation, including the solar circuit circulator (starts and stops depending on the storage tank temperature and solar collector), and the three-way valve in the heating circuit (opens and closes the storage tank depending on the temperature the tank and the return heating water).
There is no need to install any system for eliminating surplus heat. Nighttime recirculation system preprogrammed in the control unit for the elimination of surplus heat, and an oversized expansion vessel.
Antifreeze and overheating protection system pre-programmed into the control unit.
Utilizamos cookies para asegurar que damos la mejor experienca al usuario en nuestro sitio web. Si continua utilizando este sitio asumiremos que está de acuerdo.Ok