Absorber with highly selective treatment: 0.4 mm aluminium plate Absorbance 95%, Emittance 5%.
Coil hydraulic circuit: Attached to the absorber by laser welding.
Solar glass: 3.2 mm think texturised.
Insulation: On the back side, fibreglass with a 40 mm black veil. On lateral sides, fiberglass with a black veil.
Frame: Aluminium grey RAL7016
Supplied in a single package. The four connections of the solar collector are protected with expanded polystyrene edge protectors to prevent damage during transport. Additionally protected by heat shrink-wrapping with transparent, microperforated film to avoid condensation during transport and warehousing of the collector.
Selective solar collectors with 2.5 m2 total surface area. Model for vertical installation. Allows the installation of up to 10 collectors per row connected in parallel.
Absorber with highly selective treatment: 0.3 mm aluminium plate Absorbance 95%, Emittance 5%.
Gridded hydraulic circuit: Attached to the absorber by laser welding.
Solar glass: 3.2 mm thick texturised.
Insulation: On the back side, fibreglass with a 40 mm black veil. Frame: Aluminium.
Supplied in a single package. The four connections of the solar collector are protected with expanded polystyrene edge protectors to prevent damage during transport. Additionally protected by heat shrink-wrapping with transparent, microperforated film to avoid condensation during transport and warehousing of the collector.
The Mediterráneo SLIM 250 is the lightest and thinnest solar panel in the market and can be handled by only 1 person.
In addition, it is designed to fit unobtrusively into the architecture of the building.
The solar panel is manufactured using high quality materials.
It has a built-in highly selective absorber to achieve high yields.
It can be installed both in thermosyphon type and forced
type installations.
Supplied in a single package. The four connections of the solar collector are protected with expanded polystyrene edge protectors to prevent damage during transport. Additionally protected by heat shrink-wrapping with transparent, microperforated film to avoid condensation during transport and warehousing of the collector.
For rows of more than two collectors supplements must be fitted from the third collector onwards. For example, in a row of 5 collectors, one support must be fitted for every two collectors and three supplements.
For rows of more than two collectors supplements must be fitted from the third collector onwards. For example, in a row of 5 collectors, one support must be fitted for every two collectors and three supplements.
Fitting for tile mounting. The mounting kit allows you to install the mounting systems for sloping roofs. Sloping roof mounting systems are supplied with an accessory for fitting screws through the tile. An accessory may also be supplied which allows the bracket to be fitted without the need to drill holes in the tile. It is designed to be installed with any type of tile.